IUPUI IUPUI IUPUI

IUPUI Bulletins » Schools » purdue-enginer-tech » Courses » Electrical and Computer Engineering

Courses

Electrical and Computer Engineering
  • ECE 20100 Linear Circuit Analysis I (3 cr.) P: or C: MATH 26100 and PHYS 25100. C: ECE 20700. Class 3. Volt-ampere characteristics for circuit elements; independent and dependent sources; Kirchhoff's laws and circuit equations. Source transformations; Thevenin's and Norton's theorems; superposition. Transient response of resistor capacitor (RC), resistor inductor (RL), and resistor inductor capacitor (RLC) circuits; sinusoidal steady-state and impedance. Instantaneous and average power.
  • ECE 20200 Linear Circuit Analysis II (3 cr.) P: ECE 20100. P: or C: MATH 26600. Class 3. Continuation of ECE 20100. Use of computer-aided design programs. Complex frequency plane, resonance, scaling, and coupled circuits. Two-port network parameters. Laplace transform methods. Use of general loop and nodal equations, matrix formulations.
  • ECE 20400 Introduction to Electrical and Electronic Circuits (4 cr.) P: or C: PHYS 25100 and MATH 26100 Class 3. Lab 3. Students will learn basics of electrical and electronic circuits including introduction to analog and digital electronic circuits. Measurement of electrical signals using meters, probes, and oscilloscopes are covered in the laboratory component of the course. Circuits are designed for minimum hardware with emphasis on understanding analog and digital electronics with practical use of digital and analog microchips. Non-ECE majors who complete this course can continue the digital course sequence offered by the ECE department including microprocessor systems and interfacing, and digital signal processing. No credit will be given for ECE majors.
  • ECE 20700 Electronic Measurement Techniques (1 cr.) C: ECE 20100. Lab 3. Experimental exercises in the use of laboratory instruments. Voltage, current, impedance, frequency, and waveform measurements. Frequency and transient response. Use of operational amplifiers in instrumentation systems.
  • ECE 20800 Electronic Devices and Design Laboratory (1 cr.) P: ECE 20700. C: ECE 25500. Lab 3. Laboratory experiments in the measurement of electronic device characteristics. Design of biasing networks, small signal amplifiers and switching circuits.
  • ECE 21000 Sophomore Seminar (1 cr.) Class 1. A lecture series on ECE Department curriculum-related topics, electrical and computer engineering systems, skills, and career topics.
  • ECE 25500 Introduction to Electronics Analysis and Design (3 cr.) P: ECE 20100. C: ECE 20800. Class 3. Diode, bipolar transistor, and field effect transistor (FET) circuit models for the design and analysis of electronic circuits. Single-stage and multistage analysis and design. Computer-aided design calculations, amplifier operating point design, and frequency response of single and multistage amplifiers. High-frequency and low-frequency designs are emphasized.
  • ECE 26100 Engineering Programming Lab (1 cr.) P: Completion of a pre-calculus course or equivalent; completion of 12 credit hours. C: ECE 26300. Lab 3. Introduction to problem solving using software tools, in particular the C programming language.
  • ECE 26300 Introduction to Computing in Electrical Engineering (3 cr.) P: Completion of a pre-calculus course or equivalent; completion of 12 credit hours. C: ECE 26100. Class 3. An introductory course in computing programming with an emphasis on program decomposition and program structure. The objective of the course is to introduce the student to problem solving using high-level languages. The students are also introduced to number concepts fundamental in electrical engineering. Programming will be in "C" in order to develop a structured approach to problem solving. Problems drawn from the field of electrical engineering will require no prior engineering knowledge.
  • ECE 26400 Advanced C Programming (3 cr.) Class 3. Continuation of a first programming course. Topics include files, structures, pointers, and the proper use of dynamic data structures. Basic knowledge of the UNIX operating system and an introductory C programming course. C programming knowledge should include basic syntax, control structures, and file I/O, as well as experience in declaring and using functions.
  • ECE 27000 Digital Logic Design (4 cr.) P: or C: ECE 20100 and knowledge of electrical circuits. Class 3, Lab 3. Introduction to logic design, with emphasis on practical design techniques and circuit implementation. Topics include Boolean algebra; theory of logic functions; mapping techniques and function minimization; hardware description language; logic equivalent circuits and symbol transformations; electrical characteristics; propagation delays; signed number notations and arithmetic; binary and decimal arithmetic logic circuits; theory of sequential circuits; timing diagrams; analysis and synthesis of SR-, D-, T-, and JK-based sequential circuits; clock generation circuits; algorithmic state machine method of designing sequential circuits. A series of logic circuit experiments using CMOS integrated circuits for combination of logic and sequential circuits.
  • ECE 28200 UNIX Programming for Engineers (1 cr.) P: ECE 26100 and ECE 26300. Lab 2. Introduction to the UNIX operating system, including the UNIX file system, as well as UNIX tools and utilities. Introduction to Shell Programming. The emphasis will be on how these tools/utilities are utilized in the Computing Engineering field.
  • ECE 30100 Signals and Systems (3 cr.) P: ECE 20200 and MATH 26600. Class 3. Signal and system representation. Fourier series and transforms, sampling and discrete Fourier transforms. Discrete-time systems, difference equation, Z-transforms. State equations, stability, characteristic values and vectors. Continuous-time systems, time and frequency domain analysis. Continuous systems with sampled inputs.
  • ECE 30200 Probabilistic Methods in Electrical Engineering (3 cr.) P: or C: ECE 30100. Class 3. An introductory treatment of probability theory, including distribution and density functions, moments, and random variables. Applications of normal and exponential distributions. Estimation of means and variances. Introduction to random processes, correlation functions, spectral density functions, and response of linear systems to random inputs.
  • ECE 30500 Semiconductor Devices (3 cr.) P: ECE 25500, MATH 26600, and PHYS 25100. Class 3. Materials- and phenomena-based examination of devices, emphasizing the how and why of solid-state device operation.
  • ECE 31100 Electric and Magnetic Fields (3 cr.) P: MATH 26600 and PHYS 25100. Class 3. Continued study of vector calculus, electrostatics, and magnetostatics. Maxwell's equations, introduction to electromagnetic waves, transmission lines, and radiation from antennas. Students may not receive credit for both 311 and PHYS 330.
  • ECE 32100 Electromechanical Motion Devices (3 cr.) P: ECE 20200. C: ECE 31100. Class 3. The general theory of electromechanical motion devices relating to electric variables and electromagnetic forces. Basic concepts and operational behavior of DC, induction, brushless DC, and stepper motors used in control applications.
  • ECE 32600 Engineering Project Management (3 cr.) P: Sophomore Standing. Class 3. Project management is an important skill that is needed in the private and public sectors as well as specialty businesses. This course explores the challenges facing today's project managers and provides a broad understanding of the project management environment focused on multiple aspects of the project.
  • ECE 32700 Engineering Economics (3 cr.) P: Sophomore Standing. Class 3. Engineering economics is the application of economic techniques to the evaluation of design and engineering alternatives. The role of engineering economics is to assess the appropriateness of a given project, estimate its value, and justify it from an engineering standpoint. This course covers the time value of money and other cash-flow concepts, reviews economic practices and techniques used to evaluate and optimize engineering decisions, and discusses the principles of benefit-cost analysis.
  • ECE 34000 Simulation, Modeling, and Identification (3 cr.) P: ECE 20700 and ECE 30100. Class 2, Lab 3. Investigation and evaluation of design problems through simulation of systems described by ordinary differential and difference equations. Development of simulation models from physical parameters and from experimental data. Topics include continuous, discrete, and hybrid models of electrical, mechanical, and biological systems. Laboratory experiences demonstrate concepts studied in text and lecture.
  • ECE 35900 Data Structures (3 cr.) P: ECE 26300. Class 3. An introductory course in computer engineering, with emphasis on data structure and program design using the C language. The classical concepts of structured programming such as stack, queue, linked list, tree, recursion, sorting, and searching. Applications of structured programming in engineering.
  • ECE 36000 CIM in Electronics Manufacturing (4 cr.) P: ECET 15700 Class 3, Lab 2.  This course covers the manufacture and assembly of electronic printed circuit boards from component selection and board layout to soldering and test.  Special Emphasis is placed on high volume manufacturing techniques and state-of-the-art processes, such as surface mount technology (SMT).  Laboratory projects include CAD circuit board layout, using automatic placement and soldering equipment, investigating thermal characteristics of circuit boards, process design and evaluation using SPC techniques.  Effects of manufacturing processes on electrical characteristics are considered.
  • ECE 36200 Microprocessor Systems and Interfacing (4 cr.) P: ECE 27000 and ECE 26300. Class 3, Lab 3. An introduction to basic computer organizations, microprocessor instruction sets, assembly language programming, the design of various types of digital as well as analog interfaces, and microprocessor system design considerations. Laboratory provides practical hands-on experience with microprocessor software application and interfacing techniques. Design and implementation of a simple three-bus computer; detailed study of a particular microcomputer architecture and instruction set (Motorola 6812); assembly language programming techniques; system control signals and I/O port design and handshaking protocols; interrupt control systems; LSI parallel and serial interfaces; analog data and control interfaces.
  • ECE 36500 Introduction to the Design of Digital Computers (3 cr.) P: ECE 36200. Class 3. The hardware organization of computer systems: ARM instruction set architecture, processing unit, pipeline, arithmetic/logic unit design, hardwired and microprogrammed control schemes, memory and cache organization, I/O and interrupt interface design.
  • ECE 36900 Discrete Mathematics for Computer Engineering (3 cr.) P: ECE 27000. Class 3. Introduction to discrete mathematical structure and finite-state machines. Topics include foundation of discrete mathematics, groups and semi-groups, group codes in computer systems, basic model of finite-state machines, state and machine identification experiments, regular expressions, and complexity.
  • ECE 38200 Feedback System Analysis and Design (3 cr.) P: ECE 30100. Class 3. Classical concepts of feedback system analysis and associated compensation techniques. In particular, the root locus, Bode diagram, and Nyquist criterion are used as determinants of stability.
  • ECE 40100 Engineering Ethics and Professionalism (1 cr.) P: Senior Standing. Class 1. Some ethical, social, political, legal, and ecological issues that practicing engineers may encounter.
  • ECE 40800 Operating Systems and System Programming (3 cr.) P: CSCI 36200, ECE 36500. Class 3. Students will learn to design and construct operating systems for both individual computers and distributed systems, and to apply and utilize operating system functionality to their application development. The course will cover basic concepts and methods for managing processor, main memory, storage, and network resources, including their system functions. Detailed examples are taken from a number of operating systems, emphasizing the techniques used in networked UNIX and embedded Linux.
  • ECE 41000 Introduction to Digital Signal Processing (3 cr.) P: ECE 30100. P or C: ECE 36200. Class 2, Lab 3. An introductory treatment of digital signal processing algorithms and implementation using high-speed digital signal processors. Sampling, architecture, addressing modes and instruction set of digital signal processors, discrete Fourier transform, fast Fourier transform, and digital filtering.
  • ECE 41700 Multimedia Applications (3 cr.) P: ECE30100 and ECE 36200. Class 3. An introductory treatment of multimedia algorithms and implementation using high-speed multimedia processors. Detailed discussion of architecture, addressing modes and instruction set of multimedia processors, entropy coding, transform coding, speech compression, image compression, and video compression.
  • ECE 42100 Advanced Digital System Design (3 cr.) P: ECE 27000 and ECE 26300. Class 3. Advanced topics in digital design. Boolean logic. Logic optimization, VLSI and ASIC design basics. Design. Simulation. Placement and routing. Logic synthesis. FPGA structure. FPGA implementation. FPGA design flow. Verilog and VHDL coding.
  • ECE 42400 Electromechanical Systems and Applied Mechatronics (3 cr.) P: ECE 30100. Class 3. Design, optimization, and control of electromechanical and mechatronic systems. Comprehensive dynamic analysis, modeling, and simulation of electric machines, power electronics, and sensors. Application of advanced software and hardware in mechatronic systems design and optimization.
  • ECE 42700 Power Electronics (3 cr.) P: ECE 25500. Class 3. Introduction to the fundamental operating principles of power conditioning circuits that are currently being used to effect power flow from ac to dc and vice versa. Emphasis is on the relationship between form and function of these circuits. Circuits discussed will include ac/dc line-commutated converters, dc/dc converters, dc/variable frequency converters, resonant converters and ac/ac converts. Computer simulations will be used as part of the course work.
  • ECE 43200 Elementary Power Systems Engineering (3 cr.) P: ECE 32100. Class 3. Fundamental concepts of power system analysis, transmission line parameters, basic system models, steady state performance, network calculations, power flow solutions, fault studies, symmetrical components, operating strategies and control.
  • ECE 44000 Transmission of Information (4 cr.) P: ECE 30100 and ECE 30200. Class 3, Lab 3. Analysis and design of analog and digital communication systems. Emphasis on engineering applications of theory to communication system design. The laboratory introduces the use of advanced engineering workstations in the design and testing of communication systems.
  • ECE 46100 Software Engineering (3 cr.) P: CSCI 24000. Class: 3. Introduction to software engineering principles with special emphasis on the process, methods, and tools needed to develop and test quality software products and systems.
  • ECE 46300 Introduction to Computer Communication Networks (3 cr.) P: ECE 26300 and ECE 26100. Class 3. An introduction to the design and implementation of computer communication networks. The focus is on the concepts and the fundamental design principles that have contributed to the global Internet's success. Topics include: digital transmission, switching and multiplexing, protocols, MAC layer design (Ethernet/802.11), LAN interconnects and switching, congestion/flow/error control, routing, addressing, performance evaluation, internetworking (Internet) including TCP/IP, HTTP, DSN, etc. This course will include one or more project.
  • ECE 46800 Introduction to Compilers and Translation Engineering (3 cr.) P:  ECE 36200 and CSCI 36200. Class 3. Design and construction of compilers and other translators. Compilation goals, organization of a translator, grammars and languages, symbol tables, lexical analysis, syntax analysis (parsing), error handling, intermediate and final code generation, assemblers, interpreters, and an introduction to optimization/parallelization. Emphasis on engineering, from scratch, a compiler or interpreter for a small programming language, typically a C or Pascal subset. Projects involve implementation (and documentation) of such a system using C on UNIX.
  • ECE 47100 Embedded Microcontroller, Microprocessor, and DSP-Based Systems (3 cr.) P: ECE 36200 and ECE 26300. Class 3. A structured approach to the development and integration of embedded microcontroller/microprocessor/DSP-based systems. The course provides students with design experience of embedded systems. The course covers the microprocessor selection, the configuration of peripheral components, and the hardware abstraction techniques. The course also covers the C programming techniques for embedded systems and using a fixed point microprocessor for floating point calculations.
  • ECE 48300 Digital Control System Analysis and Design (3 cr.) P: ECE 38200. Class 3. An introduction to real-time computer-controlled systems analysis and design in both frequency domain and state space. Sampling theory and its effect on digital control design. Implementation, application, and industrial practice of digital control using digital signal processors and other microprocessors. Matlab/Simulink and its toolboxes are used. Regular computer and lab assignments.
  • ECE 48700 Senior Design I (1 cr.) P: Senior Standing and intent to graduate within 2 semesters. A real-life experience in engineering problem solving in a group setting from identification, planning and execution to professional-quality written and oral presentations. This is the first semester of a two semester course sequence.
  • ECE 48800 Senior Design II (2 cr.) P: ECE 48700. A real-life experience in engineering problem solving in a group setting from identification, planning and execution to professional-quality written and oral presentations. This is the second semester of a two semester course sequence.
  • ECE 49100 Engineering Design Project (1-2 cr.) P: Senior Standing and intent to graduate within 2 semesters. The student selects an engineering design project and works under the direction of the faculty sponsor. Suitable projects may be from the local industrial, municipal, state, and educational communities. May be repeated for a maximum of 4 credit hours.
  • ECE 49500 Selected Topics in Electrical and Computer Engineering (1-4 cr.) Engineering topics.
  • ECE 49600 Electrical and Computer Engineering Projects (ARR cr.) P: Consent of instructor. Hours and credits to be arranged.
  • ECE 51000 Introduction to Biometrics (3 cr.) P: ECE 30200 or graduate standing. Class 3. Basic concepts of biometrics, biometrics systems, and fundamental theories in biometrics; help student learn how to design and develop a biometric system for multi-level security applications. Topics include introduction to biometrics, face recognition, iris recognition, fingerprint recognition, speaker recognition, other biometrics, multimodal biometrics, issues and concerns in biometrics, and future biometrics.
  • ECE 51500 Software Engineering for Embedded Systems (3 cr.) P: CSCI 36200 or graduate standing. Class 3. This course teaches the object-oriented software analysis and design for embedded systems. Unified Modeling Language and Shlaer/Mellor methodology will be studied. Projects will be assigned, which lead the students through the information gathering, problem analysis, model design, and model implementation cycles. The hardware/software integration will also be covered.
  • ECE 53200 Computational Methods for Power System Analysis (3 cr.) P: ECE 43200 or Graduate Standing. System modeling of three-phase power networks. Computational methods and problem formulation related to load flow and fault studies, and economic dispatch of electric power systems. Assigned projects will involve implementing some of the methods and conducting simple studies.
  • ECE 53301 Wireless and Multimedia Computing (3 cr.) P: Graduate Standing. A treatment of Voice and Video over IP and wireless communication algorithms, protocols, standards and implementation using multicore digital signal processors and communications processor modules. Discussion of voice over IP and wireless communication algorithms, protocols and standards, and advanced wireless and voice over IP applications.
  • ECE 53600 Introduction to Computational Intelligence (3 cr.) P: or C: Programming skills; graduate standing or permission of instructor. Class 3. Basic concepts in theory and paradigms for neural networks, evolutionary computation, and fuzzy logic; algorithms and applications for hybrids of these tools known as computational intelligence are explored. Topics include artificial neural networks, fuzzy systems, and evolutionary computation. Implementations of a number of paradigms are presented, including particle swarm optimization. Applications to various areas such as biomedical engineering and non-linear control are examined.
  • ECE 53700 Multimedia Applications (3 cr.) P: ECE 30100 and ECE 36200, or Graduate Standing. Class 3. Treatment of multimedia algorithms and their hardware and software implementations using FPGA and ASIC. Detailed discussion of entropy coding, transform coding, speech compression, image compression, and video compression.
  • ECE 53800 Digital Signal Processing I (3 cr.) P: ECE 30100 and ECE 30200 or Graduate Standing. Class 3. Theory and algorithms for processing of deterministic and stochastic signals. Topics include discrete signals, systems, transforms, linear filtering, fast Fourier transforms, nonlinear filtering, spectrum estimation, linear prediction, adaptive filtering, and array signal processing.
  • ECE 54400 Digital Communications (3 cr.) P: ECE 44000 or Graduate Standing. Class 3. Introduction to digital communication systems and spread spectrum communications. Analog message digitization, signal space representation of digital signals, binary and M-ary signaling methods, detection of binary and M-ary signals, comparison of digital communication systems in terms of signal energy and signal bandwidth requirements. The principal types of spread-spectrum systems are analyzed and compared. Application of spread spectrum to multiple-access systems and to secure communication systems is discussed.
  • ECE 54700 Introduction to Computer Communication Networks (3 cr.) P: ECE 30200 or Graduate Standing. Class 3. A qualitative and quantitative study of issues in design, analysis, and operation of computer communication and telecommunication networks as they evolve toward the integrated networks of the future, employing both packet and circuit-switching technology. Packet and circuit switching, the OSI standards for architecture and protocols, elementary queuing theory for performance evaluation, random access techniques, local area networks, reliability and error recovery, and integrated networks.
  • ECE 55400 Electronic Instrumentation and Control Circuits (3 cr.) P: ECE 25500 and ECE 30100 or Graduate Standing. Class 3. Analysis and design of special amplifiers, pulse circuits, operational circuits, DC amplifiers, and transducers used in instrumentation, control, and computation.
  • ECE 55900 MOS VLSI Design (3 cr.) P: ECE 30500 and ECE 36500 or Graduate Standing. Class 3. Introduction to most aspects of large-scale MOS integrated circuit design, including device fabrication and modeling; useful circuit building blocks; system considerations; and algorithms to accomplish common tasks. Most circuits discussed are treated in detail, with particular attention given those whose regular and/or expandable structures are primary candidates for integration. All circuits are digital and are considered in the context of the silicon-gate MOS enhancement-depletion technology. Homework requires the use of existing IC mask layout software; term projects assigned.
  • ECE 56401 Computer Security (3 cr.) P: Graduate Standing. In this course we will discuss the following topics: (not necessarily in this order) security policies, confidential policies, integrity policies, security models, security design, access control, cryptography, key management, authentication, program and software, security, malicious logic, intrusion detection, network security, security attacks and countermeasures, operation system security, smartcard tamper-resistant devices, phishing, legal and ethical issues in computer security, and selected topics.
  • ECE 56500 Computer Architecture (3 cr.) P: ECE 36500 or Graduate Standing. Class 3. An introduction to problems of designing and analyzing current machine architectures. Major topics include performance and cost analysis, pipeline processing, instruction level parallelism, GPU architecture and programming, memory hierarchy, and multiprocessor architectures.
  • ECE 56600 Microprocessor System Design (3 cr.) P: ECE 36500 or Graduate Standing. Class 3. An overview of advanced-architecture CISC microprocessors and their associated support components, with emphasis on incorporating these devices into both general-purpose and embedded board-level designs for multi-microprocessor systems utilizing open-architecture system buses. Survey of 32-bit CISC microprocessor, memory management, floating point support, advanced peripherals, PLD-base "glue logic" design, performance evaluation, IECEE-standard open-architecture system buses, and various pertinent interface and networking standards. Design experience is gained through a comprehensive, semester-long project.
  • ECE 56900 Introduction to Robotic Systems (3 cr.) P: ECE 38200 or Graduate Standing. Class 3. Basic components of robotic systems; selection of coordinate frames; homogeneous transformations; solutions to kinematics of manipulator arms; velocity and force/torque relations; dynamic equations using Euler-Lagrange formulation; digital simulation of manipulator motion; motion planning; obstacle avoidance; controller design using torque method; and classical controllers for manipulators. Lab experiments and final project required.
  • ECE 57000 Artificial Intelligence (3 cr.) P: ECE 35900 or Graduate Standing. Class 3. Basic understanding of data structures, including the proper use of arrays, lists, trees, and queues. Understanding of searching and sorting concepts. Basic understanding of probability and statistics, including Bayes rule, statistical tests of significance, and normal distribution.
  • ECE 58000 Optimization Methods for Systems and Control (3 cr.) P: Consent of Instructor or graduate standing. Class 3. Introduction to optimization theory and methods, with applications in systems and control. Nonlinear unconstrained optimization, linear programming, nonlinear constrained optimization, various algorithms and search methods for optimizations, and their analysis. Examples from various engineering applications are given.
  • ECE 59500 Selected Topics in Electrical and Computer Engineering (3 cr.)  
  • ECE 60000 Random Variables and Signals (3 cr.) P: Graduate standing. Class 3. Engineering applications of probability theory. Problems of events, independence, random variables, distribution and density functions, expectations, and characteristic functions. Dependence, correlation, and regression; multivariate Gaussian distribution. Stochastic processes, stationarity, ergodicity, correlation functions, spectral densities, random inputs to linear systems, Gaussian processes.
  • ECE 60200 Lumped System Theory (3 cr.) P: MATH 511 or consent of instructor. Class 3. An investigation of basic theory and techniques of modern system theory, emphasizing linear state model formulations of continuous- and discrete-time systems in the time and frequency domains. Coverage includes notion of linearity, time invariance, discrete- and continuous-times state models, canonical forms, associated transfer functions and impulse response models, the state transition matrix, the Jordan form, controllability, observability, and stability.
  • ECE 60400 Electromagnetic Field Theory (3 cr.) P: Graduate Standing. Class 3. Review of general concepts (Maxwell's equations, materials interaction, boundary conditions, energy flow); statics (Laplace's equation, Poisson's equation); distributed parameter systems (classification of solutions, transmission lines, and waveguides); radiation and antennas (arrays, reciprocity, Huygen's principle); a selected special topic (e.g. magnetostatics, waves in anisotropic media and optical fibers).
  • ECE 60600 Solid State Devices (3 cr.) P: Graduate Standing. Class 3. A relatively broad, moderate-depth coverage of semiconductor devices and related topics. Semiconductor fundamentals required in the operational analysis of solid-state devices; detailed examination of the positive-negative (PN) junction diode and PN junction devices; heterojunction surface devices including Schottky diode, the MOS capicator, and the MOSFET.
  • ECE 60800 Computational Models and Methods (3 cr.) P: Graduate Standing. Class 3. Computation models and techniques for the analysis of algorithm complexity. The design and complexity analysis of recursive and nonrecursive algorithms for searching, sorting, and set operations; graph algorithms; matrix multiplication; polynomial evaluation; FFT calculations; and NP-complete problems.
  • ECE 61000 Energy Conversion (3 cr.) P: Graduate Standing. Class 3. Electromechanical energy conversion, reference frame theory, induction machines, wound-rotor synchronous machines, permanent magnet synchronous machines, dc-to-ac conversion, brushless dc motor drives, induction motor drives.
  • ECE 62700 Introduction to Cryptography and Secure Communication (3 cr.) P: Graduate Standing. Class 3. This course introduces the basic concepts of cryptography, emphasizing both privacy and integrity. Various cipher systems and cryptographic tools are presented including stream ciphers, block ciphers, public-key ciphers (RSA, El Gamal and others), hash functions, message authentication codes and digital signature systems. Methods used to attack the cipher systems are discussed. As well as how the cryptographic tools are used in today’s communication systems.
  • ECE 63700 Digital Image Processing I (3 cr.) P: ECE 53800 and Graduate Standing. Class 3. Introduction to digital image-processing techniques for enhancement, compression, restoration, reconstruction, and analysis. 2-D signals and systems; sampling and scanning; random fields; discrete cosine transform; discrete Karhunen-Loeve transform; grayscale transformations; linear, ranked order, and morphological filters; human vision, printing, and display of images; entropy-based compression; vector quantization; block truncation coding; transform coding; predictive coding; image degradation models; Wiener filter; constrained deconvolution; computed tomography; edge detection; shape representation; and segmentation.
  • ECE 64900 Speech Processing by Computer (3 cr.) P: Graduate Standing (knowledge of basic digital signal processing: time and frequency domains, fourier and Z-transforms, convolution, knowledge of C or FORTRAN on UNIX). Class 3. Models of the vocal tract; identification and extraction of speech features; speech transmission and compression systems; the recognition of speech and speakers by computers; control of speech synthesizers. Computer project required.
  • ECE 66200 Pattern Recognition and Decision Making Processes (3 cr.) P: Graduate Standing. Class 3. Introduction to the basic concepts and various approaches of pattern recognition and decision making process. The topics include various classifier designs, evaluation of classifiability, learning machines, feature extraction and modeling.
  • ECE 68000 Modern Automatic Control (3 cr.) P: ECE 60200 or Consent of Instructor. Class 3. Theoretical methods in optimal control theory. Topics include the calculus of variations and the Pontryagin minimum principle with applications to minimum fuel and minimum energy problems. Geometric methods will be applied to the solution of minimum time problems. Computational methods, singular problems, observer theory, and sufficient conditions for existence of solutions are also discussed.
  • ECE 68400 Linear Multivariable Control (3 cr.) P: ECE 60200 or equivalent. Class 3. A state space investigation of multi-input multi-output control design problems from the geometric perspective. The course will detail the theory and design algorithms needed for a solution to the state feedback eigenvalue assignment problem, the disturbance decoupling problem with and without internal stability, the output stabilization problem, and the tracking (or regulator) problem with internal stability.
  • ECE 68500 Introduction to Robust Control (3 cr.) P: ECE 60200 or Equivalent Class. Class 3. Introduction to the analysis and design of robust feedback control systems. Modeling and paradigms for robust control. Robust stability and measures of robust performance. Analysis of and design for robust stability and performance.
  • ECE 69500 Advanced Topics in Electrical & Computer Engineering (VAR cr.)
  • ECE 69600 Advanced Electrical Engineering Projects (VAR cr.) Individual research projects to be approved by the supervising faculty member before registering for the course. An approved written report must be filed before credit is given. (This course cannot be used on a Ph.D. plan of study for the primary area.)
  • ECE 69800 Research (M.S. thesis) (1-6 cr.) Research for M.S. thesis.
  • ECE 52702 Advanced Power Electronics Converters (3 cr.) P: ECE 20200, ECE 42700 Class 3. This course introduces students to advanced power electronics converters dealing with ac voltage.  The power electronics topologies considered in this course are sorted into two groups: a) neutral-point-clamped, b) cascase, c) flying capacitor, and d) non-conventional multilevel configurations.  The back-to-back converters presented are: a) three-phase to three-phase, b) single-phase to three-phase, c) single-phase to single-phase ac-dc-ac converters.  A new methodology will be employed to present comprehensively multilevel and back-to-back converters topologies.  The main applications of those converters are in  renewable energy systems, active power filters, energy efficiency devices and motor drive systems.
  • ECE 53801 Discrete Event Dynamic Systems (3 cr.) P: Graduate standing or consent of instructor. Class 3. This course introduces discrete event dynamic systems with their applications in system modeling, analysis, and control.  Models such as automata, Petri nets, Markov chain, and queueing systems are introduced, along with analysis of their dynamics.  Discrete event simulation methods are included.  Examples from various engineering applications are given.
  • ECE 53900 Foundations of Advanced Engineering I (3 cr.) P: ECE 27000 and ECE 30200 or graduate standing. Class 3. Several mathematical tools applied in the engineering discipline are discussed.  Statistical methods, including construction of confidence interval and hypothesis testing, as well as regression and regression analysis, are discussed.  Discrete tools are discussed; these include logic and mathematical reasoning, combinatorics, groupls and finite fields.  Applications of some of these tools in engineering problems are introduced.  Decision Theory include Bayes Theorem and applying Bayes Theorem to form decision problems.
  • ECE 54800 Introduction to 2D & 3D Digital Image Processing (3 cr.) P: ECE 30100 or consent of instructor or graduate standing. Class 3. An introduction to 2D and 3D image processing.  Lecture and projects covering a wide range of topics including 2D and 3D image analysis, image segmentation; color image processing, image sharpening, linear and filtering, image restoration, and image registration.  Graduate standing.
  • ECE 55801 Advanced Systems on a Chip (SoC) Designs for Image Processing using FPGAs (3 cr.) P: ECE 42100 and ECE 30100 or consent of instructor or Graduate standing. Class 3. This class covers advanced concepts in using Field Programmable Gate Arrays (FPGAs) designed with an HDL (VHDL for example: Very High Speed IC Hardware Description Language).  The students will learn complex interface design, advanced hardware and embedded system design and parallel processing.  Projects and lessons will focus on applications in Digital Imaging Systems.  Lecture and projects covering topics including: VHDL mapped to FPGA for state machine design, hardware and software VGA control, image filtering, data transfer to bus, and embedded controller integration.  Graduate standing or consent of instructor.
  • ECE 56601 Real-time Operating Systems and Application (3 cr.) P: ECE 36500 or consent of instructor or Graduate standing. Class 3. This course introduces students to the principles of modern operating systems focusing on real-time operating systems and embedded operating systems and their applications.
  • ECE 57101 System Modeling and Design for Smart Devices (3 cr.) P: Graduate standing or consent of instructor Class 3. Introduction to the mobile computing and the principles to design and implement application system for a smart device, including mobile computing architecture, mobile and pervasive computing environments, applications and services, context-aware computing, and human-computer interaction.
  • ECE 63901 Error Correction Coding and Secret Sharing (3 cr.) P: Graduate standing or consent of instructor. Class 3. The theory and practice of error control coding is examined.  The study includes the arithmetic of Galois fields as well as linear block, cyclic, and convulution codes.  Some applications of codes in digital communication systems and in computer systems are presented.  The dual of error coding, secret sharing is also discussed.  Several secret sharing schemes will be presented.  Applications of secret sharing are discussed.